By July 19, 2011 0 Comments Read More →

SCADA SYSTEM : APPLICATION AND PRACTICAL DESIGN

SCADA SYSTEM : APPLICATION AND PRACTICAL DESIGN  – Yogyakarta

 Mutiara Hotel Yogyakarta |  25 – 27 October 2011 | IDR  7.500.000 per peserta – non residential
 Mutiara Hotel Yogyakarta | 6 – 8 December   2011 | IDR  7.500.000 per peserta – non residential


COURSE DESCRIPTION
This Supervisory Control and Data Acquisition (SCADA) System Training program is designed to give good understanding and knowledge on SCADA System architecture and practical design, including skill enhancement of installing-programming of Master Terminal Unit (MTU, remote terminal Unit (RTU), MTU/RTU communication, MTU/RTU Port List as well as understanding of MTU/RTU software features, MTU/RTU program down load and up load, Reading and Writing module Data of MTU/RTU, SCADA system communication protocol, MTU/RTU redundancy, MTU/RTU programming for logic and PID Regulatory control. Polling and acceptation report, Input/output server and Human Machine Interface (HMI). The focus is this course is bring the participants learning about SCDA system philosophy by hands of practice directly on the integration of MTU and RTU with SCDA system software to collect geographically distributed facility data and to optimize the management of asset



OBJECTIVES
After completing this course, the participant should be able to understand the concept of SCADA system architecture and application design, build and configure the MTU and RTU modules as well, program the MTU and RTU, use sequential and PID controller implementation of MTU/RTU, Input/Output communication to get RTU data, set -up polling and exception report of MTU/RTU, link the MTU/RTU with supervisory computer and use Human Machine Interface (HMI to optimize the operation of SCADA



COURSE OUTLINE
SCADA System Overview

  •  Typical SCADA System Applications
  • Master Terminal Unit (MTU)
  • Remote Terminal Unit (RTU) Hardware
  • MTU/ RTU System Software and Configuration Set

Communication Protocol and Programming

  • Ladder Logic Programming
  • Logic and Sequential Programming
  • Polling and Data Logging

PID Controller Programming

  • Exception Reporting
  • System Redundancy
  • Input /Output Sever (Driver)

Human Machine Interface (HMI)

  • Real Time /Historical Trending
  • Dynamic Data Exchange (DDE & OPC Technology
  • Historical Database System

Multi Protocol/ Multi Brand Instrument System Integration.

  • Use Of GSM/ GPRS in SCADA System
  • Link to Office Applications



METODE

Lecturing,  studi kasus, simulasi, praktek, presentasi dan evaluasi



INSTRUKTUR
Ir. Teguh Santosa, MT and team



PASERTA

  1. Engineers (Production, Instrumentation, Process, Electrical, Maintenance, Design/ Construction, Facilities, Maintenance, Telecommunication and Information Systems/ IT)
  2. Supervisors and Superintendents who support the field SCADA systems
  3. Team Leaders who support the SCADA systems
  4. Managers who responsible for SCADA systems.
  5. Everybody who wish to broaden their knowledge on this course subject



TEMPAT

Mutiara Hotel Yogyakarta


INVESTASI

  • IDR  7.500.000 per participant – non residential
  • IDR  7.300.000 per participant  for a company which sends at least 2 persons from the same one – non residential




FASILITAS

  •  Training module (hard & cd softcopy)
  • Training kit (tas seminar atau backpack)
  • 2x coffee break, 1x lunch
  • Souvenir
  •  Sertifikat
  • Training Photo
  • Picking-up service dari Bandara/Stasiun KA ke hotel (min. 2 orang peserta dari perusahaan yang sama)

Share and Enjoy: These icons link to social bookmarking sites where readers can share and discover new web pages.
  • TwitThis
  • Facebook
  • LinkedIn
  • Google Bookmarks
  • Y!GG
  • Digg
  • del.icio.us
  • StumbleUpon
  • Reddit
  • MySpace
  • Technorati
  • YahooMyWeb
  • YahooBuzz

About the Author:

http://www.twitter.com/avisdjamal

Post a Comment