SAFETY INSTRUMENT SYSTEM & CONTROL

SAFETY INSTRUMENT SYSTEM & CONTROL

Wisma MM UGM Yogyakarta | June 20th – 22nd  2011 | IDR. 4.500.000 / participant

 

Description

This course is for engineers and technicians who wish to develop their knowledge of the design and implementation of safety instrument  systems & control as applied to industrial processes. Safety control systems are widely used in hazardous processes to protect people, the environment and equipment against serious harm by reducing the likelihood (frequency) or the impact severity of an identified emergency event..

This course will explain the key requirements of the Safety Instrument System & Control  for all stages of the safety project from hazard and risk assessment studies through to hardware and software engineering and on to the maintenance and proof testing regimes. Practical examples and discussions will assist you to develop your skills in this most important aspect of instrument engineering.

 

Objective

After completing this course, participants will understand:

  • Fundamentals of risk assessment and the role of safety regulations
  • Process hazard study methods including HAZOP
  • Principles of risk reduction by safety instrument system & control
  • The principles and application of the safety life cycle for project management
  • How to use fault tree analysis to predict accident rates and failure rates
  • The role of alarms in safety critical applications
  • Understand failure modes and the concepts of fault tolerance

How to select instruments and controllers suitable for safety systems

 

TRAINING MATERIAL OUTLINE

I. Process Safety Standard

  • Convenes and ILO Recommendation
  • Hazards Analysis Potency
  • Hazard Identification
  • Safety Life Cycle
  • Safety Integrated Level – SIL Matrix
  • Safety Instrumented System – SIS
  • Markov Model
  • Sample Calculation

II. HAZOP

  • Hazard, Danger, Safety, Risk
  • Hazard Analysis
  • Fault Tree Analysis

III. Instruments of fire and blow up Prevention

  • Fire extinguisher Method
  • Classification Area
  • Fire extinguisher Material (water, kukus, salt, foam)
  • Sample of implements calculation

IV. Hazardous Area & Electrical Classification

  • Definition of near miss, safety management
  • Safety report
  • Area & Classification Material

V. Hazard Control, Lockout & Tag out

  • Definition
  • Effective Program of LOTO
  • Policy LOTO
  • LOTO Procedure

 

Peserta

WHO SHOULD ATTEND

This workshop that introduces managers, engineers and technicians to the latest standards and practices in the application of safety instrumented systems and Emergency Shutdown systems for the protection of hazardous processes.

 

Metode

Presentasi, Diskusi, Simulasi, Studi kasus, Evaluasi

 

Instructor

  • Ir. Teguh Santosa & Team
  • Expert in Safety Instrument System & Control

 

Duration:

3 days training

 

Time:

June 20 th – 22 nd  2011

 

Venue:

Wisma MM UGM Yogyakarta

 

Course fee:

  • Rp 4.500.000,-/ participant (Non Residential)

 

About the Author:

http://www.twitter.com/avisdjamal

Post a Comment