By December 31, 2015 0 Comments Read More →

FLANGE AND JOINT INTEGRITY – Pasti Jalan

EFFECTIVE FLANGE AND JOINT INTEGRITY IN MECHANICAL ENGINEERING

Hotel Ibis, Yogyakarta | 02 – 03 Januari 2016 (Jadwal weekend) | Rp 5.900.000,- per peserta
Hotel Ibis, Yogyakarta | 04 – 06 Januari 2016 | Rp 5.900.000,- per peserta – PASTI JALAN
Hotel Ibis, Yogyakarta | 09 – 10 Januari 2016 (Jadwal weekend) | Rp 5.900.000,- per peserta
Hotel Ibis, Yogyakarta | 11 – 13 Januari 2016 | Rp 5.900.000,- per peserta

Jadwal Training 2016 Selanjutnya …

 

 



DESKRIPSI

In the oil & gas and petrochemical industries, compressors play important role to support all facilities and process that require pressurized gases. Furthermore, air or gas leakage is not acceptable since it affecting on productivity or safety. Hence compressor flange joint integrity should be taken into account.

The reliability of the flanged joint depends critically on competent control of the joint making process, alignment, assembly, and its measurement. It is common to put considerable effort into the design process only for improper assembly to lead to joint failure. Therefore it is important that joint making is undertaken by trained and validated technicians who have an understanding of the procedure and the underlying principles and practice.

To achieve better performance on flange joint, it is important to ensure that all individuals with responsibilities in connection with ensuring the safe control of flange joints are trained and validated as competent to undertake these responsibilities. The program is based around a presentation of best practices and utilizes an intelligent bolting system to explain and demonstrate these principles. This unique method allows key areas of joint making e.g. the need to use bolt lubricant, to be clearly understood.

 

MATERI FLANGE AND JOINT INTEGRITY

  1. Introduction to compressor alignment and assembly
  2. Flange Joint Preparation and Assembly
  3. Flange design and standard
  4. Bolt and bolt joint
  5. Bolt and flange strength
  6. Stress Analysis and Tightening Joints
  7. Load control vs torque control
  8. Load and torque measurement
  9. Intelligent bolt control
  10. Protection and Maintenance

 

Metode

Presentasi, Diskusi , Studi Kasus

 

 

 

 

Jadwal Training 2016

  • Hotel Ibis Malioboro, Yogyakarta
  • 04 – 06 Januari 2016
  • 11 – 13 Januari 2016
  • 19 – 21 Januari 2016
  • 25 – 27 Januari 2016
  • 01 – 03 Februari 2016
  • 09 – 11 Februari 2016
  • 16 – 18 Februari 2016
  • 23 – 25 Februari 2016
  • 29 Februari – 02 Maret 2016
  • 07 – 08 Maret 2016
  • 14 – 16 Maret 2016
  • 21 – 23 Maret 2016
  • 28 – 30 Maret 2016
  • 04 – 06 April 2016
  • 11 – 13 April 2016
  • 18 – 20 April 2016
  • 26 – 28 April 2016
  • 02 – 03 Mei 2016
  • 09 – 11 Mei 2016
  • 16 – 18 Mei 2016
  • 23 – 25 Mei 2016
  • 31 Mei – 02 Juni 2016
  • 06 – 08 Juni 2016
  • 13 – 15 Juni 2016
  • 20 – 22 Juni 2016
  • 27 – 29 Juni 2016
  • 11 – 13 Juli 2016
  • 18 – 20 Juli 2016
  • 25 – 27 Juli 2016
  • 01 – 03 Agustus 2016
  • 08 – 10 Agustus 2016
  • 15 – 16 Agustus 2016
  • 22 – 24 Agustus 2016
  • 29 – 31 Agustus 2016
  • 06 – 08 September 2016
  • 13 – 15 September 2016
  • 19 – 21 September 2016
  • 26 – 28 September 2016
  • 04 – 06 Oktober 2016
  • 11 – 13 Oktober 2016
  • 17 – 19 Oktober 2016
  • 24 – 26 Oktober 2016
  • 31 Oktober – 02 November 2016
  • 07 – 09 November 2016
  • 14 – 16 November 2016
  • 21 – 23 November 2016
  • 28 – 30 November 2016
  • 05 – 07 Desember 2016
  • 13 – 15 Desember 2016
  • 19 – 21 Desember 2016
  • 27 – 29 Desember 2016

 

 

Jadwal Weekend 2016

  • 02 – 03 Januari 2016
  • 09 -10 Januari 2016
  • 16 – 17 Januari 2016
  • 23 – 24 Januari 2016
  • 30 – 31 Januari 2016
  • 06 – 07 Februari 2016
  • 13 – 14 Februari 2016
  • 27 – 28 Februari 2016
  • 05 – 06 Maret 2016
  • 12 – 13 Maret 2016
  • 19 – 20 Maret 2016
  • 26 – 27 Maret 2016
  • 02 – 03 April 2016
  • 09 – 10 April 2016
  • 16 – 17 April 2016
  • 23 – 24 April 2016
  • 30 April – 01 Mei 2016
  • 07 – 08 Mei 2016
  • 14 – 15 Mei 2016
  • 21 – 22 Mei 2016
  • 28 – 29 Mei 2016
  • 04 – 05 Juni 2016
  • 11 – 12 Juni 2016
  • 18 – 19 Juni 2016
  • 25 – 26 Juni 2016
  • 02 – 03 Juli 2016
  • 09 – 10 Juli 2016
  • 16 – 17 Juli 2016
  • 23 – 24 Juli 2016
  • 30 – 31 Juli 2016
  • 06 – 07 Agustus 2016
  • 13 – 14 Agustus 2016
  • 20 – 21 Agustus 2016
  • 27 – 28 Agustus 2016
  • 03 – 04 September 2016
  • 10 – 11 September 2016
  • 17 – 18 September 2016
  • 01 – 02 Oktober 2016
  • 08 – 09 Oktober 2016
  • 15 – 16 Oktober 2016
  • 22 – 23 Oktober 2016
  • 29 – 30 Oktober 2016
  • 05 – 06 November 2016
  • 12 – 13 November 2016
  • 19 – 20 November 2016
  • 26 – 27 November 2016
  • 03 – 04 Desember 2016
  • 10 – 11 Desember 2016
  • 17 – 18 Desember 2016

 



Investasi dan Fasilitas

  • Rp.5.900.000 (Non Residential)
  • Quota minimum 2 peserta
  • Fasilitas : Certificate,Training kits, USB,Lunch,Coffe Break, Souvenir
  • Untuk peserta luar kota disediakan transportasi antar-jemput dari Bandara/Stasiun ke Hotel (berlaku bagi perusahaan yang mengirimkan minimal 3 peserta)

 

Investasi dan Fasilitas

  • Rp.5.900.000 (Non Residential)
  • Quota minimum 2 peserta
  • Fasilitas : Certificate,Training kits, USB,Lunch,Coffe Break, Souvenir
  • Untuk peserta luar kota disediakan transportasi antar-jemput dari Bandara/Stasiun ke Hotel (berlaku bagi perusahaan yang mengirimkan minimal 3 peserta)

 

Instruktur

Ir. Paryana Puspaputra, M.Eng. and Team

 

 

 

Share and Enjoy: These icons link to social bookmarking sites where readers can share and discover new web pages.
  • TwitThis
  • Facebook
  • LinkedIn
  • Google Bookmarks
  • Y!GG
  • Digg
  • del.icio.us
  • StumbleUpon
  • Reddit
  • MySpace
  • Technorati
  • YahooMyWeb
  • YahooBuzz

About the Author:

http://www.twitter.com/avisdjamal

Post a Comment