By January 15, 2014 0 Comments Read More →

EFFECTIVE FLANGE AND JOINT INTEGRITY IN MECHANICAL ENGINEERING

EFFECTIVE FLANGE AND JOINT INTEGRITY IN MECHANICAL ENGINEERING

Yogyakarta | 20 – 21 Januari 2014 | Rp. 4.500.000 Per Peserta
Semarang / Solo | 20 – 21 Januari 2014 | Rp. 5.750.000 Per Peserta
Bandung / Jakarta / Surabaya | 20 – 21 Januari 2014 | Rp. 6.500.000 Per Peserta
Bali / Batam /Balikpapan / Manado / Lombok | 20 – 21 Januari 2014 | Rp. 7.850.000 Per Peserta
Yogyakarta | 27 – 28 Januari 2014 | Rp. 4.500.000 Per Peserta
Semarang / Solo | 27 – 28 Januari 2014 | Rp. 5.750.000 Per Peserta
Bandung / Jakarta / Surabaya | 27 – 28 Januari 2014 | Rp. 6.500.000 Per Peserta
Bali / Batam /Balikpapan / Manado / Lombok | 27 – 28 Januari 2014 | Rp. 7.850.000 Per Peserta

Jadwal Training 2014 Selanjutnya ...

 



DESKRIPSI

In the oil & gas and petrochemical industries, compressors play important role to support all facilities and process that require pressurized gases. Furthermore, air or gas leakage is not acceptable since it affecting on productivity or safety. Hence compressor flange joint integrity should be taken into account.

The reliability of the flanged joint depends critically on competent control of the joint making process, alignment, assembly, and its measurement. It is common to put considerable effort into the design process only for improper assembly to lead to joint failure. Therefore it is important that joint making is undertaken by trained and validated technicians who have an understanding of the procedure and the underlying principles and practice.

To achieve better performance on flange joint, it is important to ensure that all individuals with responsibilities in connection with ensuring the safe control of flange joints are trained and validated as competent to undertake these responsibilities. The program is based around a presentation of best practices and utilizes an intelligent bolting system to explain and demonstrate these principles. This unique method allows key areas of joint making e.g. the need to use bolt lubricant, to be clearly understood.

 

MATERI

  1. Introduction to compressor alignment and assembly
  2. Flange Joint Preparation and Assembly
  3. Flange design and standard
  4. Bolt and bolt joint
  5. Bolt and flange strength
  6. Stress Analysis and Tightening Joints
  7. Load control vs torque control
  8. Load and torque measurement
  9. Intelligent bolt control
  10. Protection and Maintenance

 

Metode

Presentasi, Diskusi , Studi Kasus

 

 

EFFECTIVE FLANGE AND JOINT INTEGRITY IN MECHANICAL ENGINEERING

Tempat (Tentative):

  • Hotel Santika Kuta, Bali
  • Hotel Nagoya Plaza, Batam
  •  Hotel Fave, Balikpapan
  • Hotel Aston, Manado
  • The Santosa Villas and Resort, Lombok
  • Hotel Gino Ferucci, Bandung
  •  Hotel Santika Pandegiling, Surabaya
  • Hotel Fave Pasar baru Jakarta, Jakarta
  • Hotel Ibis Solo
  • Hotel Ibis Simpang Lima, Semarang
  • Hotel Ibis Malioboro, Yogyakarta

 

Jadwal Training 2014

  • 06 – 07 Januari 2014
  • 15 – 16  Januari 2014
  • 20 – 21 Januari 2014
  • 27 – 28 Januari 2014
  • 03 – 04Februari 2014
  • 10 – 11 Februari 2014
  • 17 – 18 Februari 2014
  • 24 – 25 Februari 2014
  • 03 – 04 Maret 2014
  • 10 – 11 Maret 2014
  • 17 – 16 Maret 2014
  • 24 – 25 Maret 2014
  • 01 – 02 April 2014
  • 07 – 08 April 2014
  • 14 – 17April 2014
  • 21 – 22 April 2014
  • 28 – 29 April 2014
  • 05 – 06 Mei 2014
  • 12 – 15 Mei 2014
  • 19 – 21 Mei 2014
  • 02 – 03 Juni 2014
  • 09 – 10 Juni 2014
  • 16 – 17 Juni 2014
  • 23 – 26 Juni 2014
  • 30 Juni – 1 Juli 2014
  • 07 – 08 Juli 2014
  • 16 – 17 Juli 2014
  • 21 – 22 Juli 2014
  • 04 – 05 Agustus 2014
  • 11 – 12 Agustus 2014
  • 18 – 19 Agustus 2014
  • 25 – 26 Agustus 2014
  • 01 – 02 September 2014
  • 08 – 09 September 2014
  • 15 – 16 September 2014
  • 22 – 23 September 2014
  • 29 – 30 September 2014
  • 06 – 07 Oktober 2014
  • 13 – 14 Oktober 2014
  • 20 – 21 Oktober 2014
  • 27 – 28 Oktober 2014
  • 03 – 04 November 2014
  • 10 – 11November 2014
  • 17 – 18 November 2014
  • 24 – 25  November 2014
  • 01 – 02 Desember 2014
  • 08 – 09 Desember 2014
  • 15 – 16 Desember 2014
  • 22 – 23 Desember 2014
  • 29 – 30 Desember 2014

 

Investasi dan Fasilitas 2013

  • Rp.7.850.000 (Non Residential) untuk lokasi di Bali, Batam, Balikpapan, Manaado atau Lombok
  • Rp. 6.500.000 (Non Residential) untuk lokasi di Bandung, Jakarta  atau Surabaya
  • Rp 5.750.000 (Non Residential) untuk Lokasi Solo atau Semarang
  • Rp. 4.500.000 (Non Residential) untuk lokasi di Yogyakarta
  • Quota minimum 3 peserta
  • Fasilitas : Certificate,Training kits, USB, Lunch, Coffee Break, Souvenir

 

Instruktur

Ir. Paryana Puspaputra, M.Eng. and Team

 

 

 

Share and Enjoy: These icons link to social bookmarking sites where readers can share and discover new web pages.
  • TwitThis
  • Facebook
  • LinkedIn
  • Google Bookmarks
  • Y!GG
  • Digg
  • del.icio.us
  • StumbleUpon
  • Reddit
  • MySpace
  • Technorati
  • YahooMyWeb
  • YahooBuzz

About the Author:

Post a Comment