By February 8, 20130 Comments Read More →


CONTROL VALVES AND ACTUATORS: Selection, Calculations, Sizing, Applications, Operation, Diagnostic Testing, Troubleshooting, and Maintenance” – Almost Running

Ibis Hotels Malioboro, Yogyakarta | 26 s.d 28 Februari 2013 | Rp 7.500.000,-  Per Peserta 




Extensive course materials provided contained useful information about valves/sizing and selection both theoretical and practical. You will gain a practical understanding of control valves, actuators, and positioner designs and their applications. The course also provides methods that can be used to identify specific valve problems and arrive at acceptable solutions within engineering tolerance


  1. Compare various types of final control elements
  2. Understand a typical valve operation in a control loop
  3. Differentiate between various types of valves and the benefits of each
  4. Compare rising stem to rotary style valves
  5. Analyze a control system to determine control valve needs
  6. Use ISA standards for control valve specification and selection
  7. Size valves for any flow condition likely to be found in a process plant
  8. Evaluate and select actuators for specific applications
  9. Specify appropriate auxiliaries including positioners and I/P transducers
  10. Design control valve installations that are safe and trouble-free


Sertifikat   Training

Setelah mengikuti training ini, bagi peserta yang lolos kualifikasi akan mendapatkan sertifikat dari lembaga pelaksana training



1. Introduction:

  • Valve in Loop,
  • Actuator,
  • Positioner

2. Basic Valve Types:

  • Globe Valves,
  • Ball Valves,
  • Plug Valves,
  • Butterfly Valves

3. Actuators:

  • Spring/Diaphragm,
  • Piston,
  • Vane,
  • Scotch-Yoke,
  • R & P

4. Comparison:

  • Rising Stem,
  • Rotary Stem,
  • Accessories,
  • Positioner,
  • I/P Converters

5. Valve Performance:

  • Gain,
  • Time,
  • Trim,
  • Special Needs

6. Flashing/Cavitation & Noise:

  • Cause/Effect,
  • Prevention,
  • OSHA,
  • Source and Abatement

7. Installation:

  • Performance, Safety and Others

8. Valve Sizing:

  • Valve sizing calculation Manual,
  • Valve Sizing calculation Computer

9. Specification and Selection:

  • Process Requirements,
  • Other Considerations

10. Maintenance and Troubleshooting Considerations:

  • Special Requirements,
  • Diagnostic Tools

11. Smart Valves:

  • Available Designs,
  • Applications in Industry

12. Test valves to evaluate performance factors

13. Size valves manually and with software

14. Specify valves, actuators, and auxiliaries for specific applications

15. Evaluate operation of valves with pneumatic actuators and positioners

16. Smart valve/positioner operation demonstration 



This Intensive program covering the educational needs of Instrumentation and Control Engineers & Technicians, Mechanical Engineers & Technicians, Projects Engineers, Operation Engineers, Process and Utility Supervisors, and Technical Supervisory personnel involved in Sizing, Selecting, and Applying Process Control Valves. No specific prerequisite training or experience required for registration.



Dr. Eng. Deendarlianto, & Team


Time and Venue

  • Tanggal : 26 s.d. 28 Februari 2013
  • Pukul     : 08.00 – 16.00 WIB
  • Tempat  : Hotel IBIS Malioboro Yogyakarta




Course Fee:

Rp 7.500,000,-/ participant Non Residential



  •  Modul
  •  Sertifikat
  •  Souvenir
  • Training kit
  •  2x Coffe Break dan Lunch




Posted in: Mechanical, Yogyakarta

About the Author:

Post a Comment