ASME DESIGN & FABRICATION of PRESSURE VESSELS

ASME DESIGN & FABRICATION of PRESSURE VESSELS

Hotel Melia Purosani, Yogyakarta | 28 s.d 30 Mei 2013 | Rp. 6.500.000, /participant
Hotel Melia Purosani, Yogyakarta | 11 s.d 13 Juni 2013 | Rp. 6.500.000, /participant
Hotel Melia Purosani, Yogyakarta | 18 s.d 20 Juni 2013 | Rp. 6.500.000, /participant
Hotel Melia Purosani, Yogyakarta | 25 s.d 27 Juni 2013 | Rp. 6.500.000, /participant
Hotel Melia Purosani, Yogyakarta | 2 s.d 4 Juli 2013 | Rp. 6.500.000, /participant
Hotel Melia Purosani, Yogyakarta | 27 s.d 29 Agustus 2013 | Rp. 6.500.000, /participant
Hotel Melia Purosani, Yogyakarta | 3 s.d 5 September 2013 | Rp. 6.500.000, /participant
Hotel Melia Purosani, Yogyakarta | 10 s.d 12 September 2013 | Rp. 6.500.000, /participant
Hotel Melia Purosani, Yogyakarta | 24 s.d 26 September 2013 | Rp. 6.500.000, /participant

Jadwal Training 2013 Selanjutnya …

 




DESCRIPTION

Based on the rules for pressure vessel design and construction, this course is a comprehensive introduction to the requirements of Section VIII, Division 1 including background, organization, design, materials, fabrication, inspection, testing and documentation of pressure vessels. It covers the more commonly applied subsections and paragraphs, and includes a practical discussion of individual problems and situations. Designed primarily for beginners, experienced vessel designers, who would like to update their knowledge of the Code, will also benefit from attending.



CONTENT

1. Introduction to ASME Codeand section VIII
2. General Requirements
3. Material Requirement
4. General Design Requirement
5. Design for Internal Pressure
6. Design for Buckling
7. Design of Flat Heads and Covers
8. Design of Opening
9. Fabrication Requirement
10. NDE, Testing, Pressure Relief and Documentation Requirement
11. Requirement for Vessels Fabricated by Welding
12. Requirement for Carbon and Low Alloy Steel
13. Requirement for High Alloy Steel
14. Requirement for Heat Treated Material
15. Code Appendices
16. Example Problem



INSTRUCTOR

Ir. Subarmono MT, PE
Expert in Mechanical Material



WHO SHOULD ATTEND
Those involved with the purchase, design, fabrication, or inspection of pressure vessels. Some technical background will be helpful, but attendees are not required to have an Engineering degree or previous work experience in the subject matter.



METHODS

Presentation, Discussion, Simulation, Case Study, Evaluation

 

WAKTU & TEMPAT

  • Hotel Melia Purosani Yogyakarta
  • Pukul 08.00 – 16.00 WIB
  • 29 s.d 31 Januari 2013
  • 5 s.d 7 Februari 2013
  • 19 s.d 21 Februari 2013
  • 26 s.d 28 Februari 2013
  • 19 s.d 21 Maret 2013
  • 26 s.d 28  Maret 2013
  • 9 s.d 11 April 2013
  • 16 s.d 18 April 2013
  • 14 s.d 16 Mei 2013
  • 28 s.d 30 Mei 2013
  • 11 s.d 13 Juni 2013
  • 18 s.d 20 Juni 2013
  • 25 s.d 27 Juni 2013
  • 2 s.d 4 Juli 2013
  • 27 s.d 29 Agustus 2013
  • 3 s.d 5 September 2013
  • 10 s.d 12 September 2013
  • 24 s.d 26 September 2013
  • 8 s.d 10 Oktober 2013
  • 16 s.d 18 Oktober 2013
  • 22 s.d 24 Oktober 2013
  • 6 s.d 8 November 2013
  • 12 s.d 14 November 2013
  • 19 s.d 21 November 2013
  • 26 .d 28 November 2013
  • 3 s.d 5 Desember 2013
  • 10 s.d 12 Desember 2013
  • 17 s.d 19 Desember 2013



COURSE FEE

Rp 6.500.000,-/participant

Special price :

  • Rp. 5.500.000,-/participant (Non Residensial) Minimal kirim 3 peserta
  • Rp. 4.500.000,-/participant (Non Residensial) Minimal kirim 4 peserta

FASILITAS

  1. Training Module
  2. Free High Quality Electronic Books
  3. Certificate
  4. Jacket or Batik
  5. Qualified Bag
  6. Training Photo
  7. Training room with full AC facilities and multimedia
  8. Once lunch and twice coffee break every day of training
  9. Qualified Instructor
  10. Transportation from airport / railway to hotel and from hotel to the training venue

About the Author:

Post a Comment